Home / heat exchanger for CO2 heat pump
Air source heat pump applied CO2 as refrigerant, and get heat from air. Over critical section co2 system heat release temperature is about 80 -100 °C, and it is very suitable for heating water.HZSS CO2 heat pump water heater gas cooler/regenerator can standa high pressure,inner tube material is BFe10-1-1,and the spiral grooves inner tube cab also enhance the heat exchangers ability for pressure standing. Besides BFe10-1-1 material can also be of anticorrosion.
Product Profile: HZSS's self developed supercritical heat exchanger is applied in transcritical carbon dioxide heatpump water heater system.
Product Features:
1. Water in the inner coil and gas in between the inner and outer coil to enhanceturbulence intensity and heat transfer coefficient.
2. Spirally corrugated tubes increase heattransfer surface area to create higherefficiency.
3. Reliable with higher pressure stand and less welding points.
4. Anti-freezing and self cleaning.
5. Cupronickel inner tube gives better compressionperformance and corrosion resistance.
Model List of Heat Exchanger for CO2 Heat Pump | ||||||
Model | Refrigerant | Water flow | Capacity | Drawing | ||
GPM | m³/h | Btu/h | kW | |||
SS-0060GN-U-S | R744 | 0.43 | 0.10 | 15400 | 4.5 | View Drawings |
SS-0100GN-U-S | R744 | 0.57 | 0.13 | 20500 | 6.0 | View Drawings |
SS-0125GN-U-S | R744 | 0.76 | 0.17 | 27300 | 8.0 | View Drawings |
SS-0150GN-U-3 | R744 | 1.14 | 0.26 | 40900 | 12 | View Drawings |
SS-0250GN-F-3 | R744 | 1.51 | 0.34 | 54600 | 16 | View Drawings |
SS-0300GN-F-3 | R744 | 2.60 | 0.59 | 93800 | 28 | View Drawings |
SS-0360GN-F-3 | R744 | 3.31 | 0.75 | 119400 | 35 | View Drawings |
SS-0300GN-U-6 | R744 | 5.21 | 1.18 | 187600 | 55 | View Drawings |
SS-0300GN-U-9 | R744 | 6.63 | 1.51 | 238800 | 70 | View Drawings |
SS-0300GN-U-12 | R744 | 9.47 | 2.15 | 341200 | 100 | View Drawings |
SS-0420GN-U-12 | R744 | 12.78 | 2.90 | 460600 | 135 | View Drawings |
Note: SS-0XXXGN, G=Carbon steel,N=Cupronickel, U=Trombone. Test Condition:Air side temp dry/wet bulb 20/15℃, Water Inlet Temp 15℃, Water Outlet Temp 55℃. Air side temp dry/wet bulb 68/59°F, Water Inlet Temp 59°F, Water Outlet Temp 131°F. | ||||||
Model | Refrigerant Inlet OD(mm) | Refrigerant Outlet OD(mm) | Water Connection | Length(mm) | Width(mm) | Height (mm) | A(mm) | B(mm) | C(mm) | N(pcs) |
SS-0060GN-U-S | 9.52 | 9.52 | R 1/2" | 420 | 145 | 272 | 122 | 45 | 231 | 1 |
SS-0100GN-U-S | 9.52 | 9.52 | R 1/2" | 430 | 147 | 354 | 122 | 45 | 312 | 1 |
SS-0125GN-U-S | 9.52 | 9.52 | R 1/2" | 480 | 152 | 394 | 122 | 45 | 352 | 1 |
SS-0150GN-U-3 | 12.7 | 12.7 | R 1/2" | 610 | 230 | 463 | 127 | 50 | 410 | 1 |
SS-0250GN-F-3 | 16 | 16 | R 3/4" | 580 | 325 | 430 | 290 | 60 | 385 | 1 |
SS-0300GN-F-3 | 16 | 16 | R 3/4" | 680 | 328 | 475 | 290 | 60 | 422 | 1 |
SS-0360GN-F-3 | 16 | 16 | R 1" | 675 | 340 | 516 | 300 | 60 | 456 | 1 |
SS-0300GN-U-6 | 22 | 22 | R 1" | 665 | 400 | 669 | 152 | 83 | 599 | 2 |
SS-0300GN-U-9 | 22 | 22 | R 1-1/4" | 690 | 600 | 674 | 352 | 83 | 599 | 3 |
SS-0300GN-U-12 | 22 | 22 | R 1-1/4" | 690 | 800 | 674 | 152 | 83 | 599 | 4 |
SS-0420GN-U-12 | 22 | 22 | R 1-1/4" | 725 | 900 | 684 | 170 | 83 | 599 | 4 |